| View previous topic :: View next topic |
| Author |
Message |
asmallri
Joined: 12 Aug 2004
Posts: 1630
Location: Perth, Australia
|
| Beta Testers wanted - Ethernet Bootloader for ENC28J60 |
 Posted: Mon Mar 06, 2006 3:23 am |
 |
|
I am looking for Beta Testers for an Ethernet Bootloader for the ENC28J60 used with any of the following PICs PIC18F242 / PIC18F252 / PIC18F442 / PIC18F452 / PIC18F2525 / PIC18F2620 / PIC18F4525 / PIC18F4620. For those interested I have a reference design (no PCB available) based on the PIC18F2620 which also supports an SD Card, Serial Port, Status LEDs and a 25256 FRAM.
If you are interested in testing the bootloader and already have a suitable hardware platform let me know. The bootloader includes some diagnostics so if you have a hardware platform that is not yet debugged this may be of interest to you.
I have added support for the EDTP Frame Thrower Plus based on the PIC18F8621 but this has not yet been tested (I don't have one).
Updated 8th March 2006 - added support for the CCS Embedded Ethernet Development board based on the PIC18F4520 and ENC28J60 but this has not yet been tested (I don't have one).
_________________
Regards, Andrew
http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!!
Last edited by asmallri on Tue Mar 07, 2006 8:58 pm; edited 3 times in total |
|
 |
Mark
Joined: 07 Sep 2003
Posts: 2838
Location: Atlanta, GA
|
|
| Posted: Mon Mar 06, 2006 7:40 pm |
|
|
Hi Andrew,
My ENC28J60 is connected to an 18F6720 but I'd be glad to be a beta tester. |
|
|
asmallri
Joined: 12 Aug 2004
Posts: 1630
Location: Perth, Australia
|
|
| Posted: Mon Mar 06, 2006 8:04 pm |
|
|
| Mark wrote: | Hi Andrew,
My ENC28J60 is connected to an 18F6720 but I'd be glad to be a beta tester. |
The Ethernet bootloader does currently not support PICs with program memory > 64K. I intend to add this capability shortly but not until after this round of testing. I will let you know when this is ready.
_________________
Regards, Andrew
http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!! |
|
|
bretesq
Joined: 07 Feb 2006
Posts: 16
|
|
| Posted: Tue Mar 07, 2006 2:42 pm |
|
|
Hey Andrew,
I have a ENC28J60 along with a PIC18F452. I am having some problems with the wiring, but I would be more than happy to test it for you. |
|
|
bretesq
Joined: 07 Feb 2006
Posts: 16
|
|
| Posted: Tue Mar 07, 2006 2:48 pm |
|
|
| Also, I have all the hardware you listed the reference diagram for. The main issue of mine is the ethernet transformer. I have salvaged one off of an old NIC, along with its 25mhz crystal. I am very interested in getting this setup to work. Thanks |
|
|
asmallri
Joined: 12 Aug 2004
Posts: 1630
Location: Perth, Australia
|
|
| Posted: Wed Mar 15, 2006 8:08 am |
|
|
| Mark wrote: | Hi Andrew,
My ENC28J60 is connected to an 18F6720 but I'd be glad to be a beta tester. |
Hi Mark,
I am currently adding support for the 18F6720. Could you send me the schematic for your board.
Regards, Andrew
_________________
Regards, Andrew
http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!! |
|
|
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
