CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Pullup resistors on which lines for atmel dataflash?

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
tbsnake2
Guest
Pullup resistors on which lines for atmel dataflash?
PostPosted: Sun Aug 01, 2004 9:27 am     Reply with quote
It doesnt mention anything on the atmel dataflash sheet - do you need pullups on any of the lines, and if so, which ones? I am assuming Dout would need one or the pic could have a floating input at times.

Thanks
falleaf



Joined: 23 May 2004
Posts: 48

View user's profile Send private message

PostPosted: Sun Aug 01, 2004 10:41 am     Reply with quote
which chip u r using? New chips have internal pullups. Old ones have internal pullups on port 0 as I remember.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group