CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
16-bit PIC + ICD/MachX

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
Justin
Guest
16-bit PIC + ICD/MachX
PostPosted: Tue Oct 02, 2007 9:11 am     Reply with quote
Has anyone here successfully wired up a PIC24F and programmed with either the ICD or MachX yet? I believe CCS has does this with demo boards, but not the DIP chips... I am doing this through the ICSP cable not the ZIF socket. The chip I am using is the PIC24FJ64GA002.
robi77



Joined: 09 Oct 2007
Posts: 2

View user's profile Send private message

PostPosted: Tue Oct 09, 2007 6:18 am     Reply with quote
hi!

I was tried to use same ic, but it same not worked.
PIC24FJ64GA002-I/SO

Im was checked with an oscilloscope and the icd diagnostic, but the clock and data pins dont do the expected waveform.

Somebody have any success with this PIC?
kYlee
Guest
PostPosted: Sat Nov 03, 2007 4:38 am     Reply with quote
use brenner 9 Smile

hxxp : / / sprut.de / electronic / pic / projekte / brenner9 / index . hxm
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group