CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Target for ICD-U40 running at 5.4V

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
icefield



Joined: 09 May 2005
Posts: 20
Location: Canada

View user's profile Send private message

Target for ICD-U40 running at 5.4V
PostPosted: Thu Aug 30, 2007 3:54 pm     Reply with quote
Our target is running at Vdd of 5.4V (for a variety of reasons). I've noticed that the ICD-U40 causes the circuit to draw a larger supply current than normal (~20mA extra) as compared to another target that runs at 3.6V.

Since I lack the wiring diagram for the ICD-U40, I'm wondering if this is due to diode leakage to the ICD's 5.0V supply (or some other signal line). And of, course, whether this might cause damage to the ICD.

Can anyone tell me whether this is an issue? Will I burn out the ICD?
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group