CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Trouble with debug mode on ICD-U40

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
kg6vkg



Joined: 25 Nov 2005
Posts: 13
Location: San Diego

View user's profile Send private message Send e-mail Yahoo Messenger

Trouble with debug mode on ICD-U40
PostPosted: Thu Dec 08, 2005 5:50 pm     Reply with quote
I am new to CCS and am using the ICD-U40 with CCS PCWH 3.239. I was working on some code tried to go into debug mode and the status word said attaching and then gave me the following error: "No response from icd, check connection and power to icd". I have tried connecting to different USB ports and get the same message in each case. When I go to "tools" Menu then "ICD" and download the runtime version of the code it works fine. I have restarted my system and it made no difference? Any ideas why I can't debug? -Thanks for your time - Mark
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Thu Dec 08, 2005 6:02 pm     Reply with quote
What PIC are you using ?
kg6vkg



Joined: 25 Nov 2005
Posts: 13
Location: San Diego

View user's profile Send private message Send e-mail Yahoo Messenger

Pic Chip
PostPosted: Thu Dec 08, 2005 6:15 pm     Reply with quote
I am using an 18F4520.
kg6vkg



Joined: 25 Nov 2005
Posts: 13
Location: San Diego

View user's profile Send private message Send e-mail Yahoo Messenger

PostPosted: Sat Dec 10, 2005 2:11 am     Reply with quote
I found the problem. In the debug configure it changed to look for a serial ICD and not the USB ICD. Thanks for all your help. - Mark
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group