CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
CANopen for CCS / PIC24?

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
allenhuffman



Joined: 17 Jun 2019
Posts: 620
Location: Des Moines, Iowa, USA

View user's profile Send private message Visit poster's website

CANopen for CCS / PIC24?
PostPosted: Tue Apr 22, 2025 3:11 pm     Reply with quote
The last post mentioning CANopen was from 2016. In the past 9 years, has anything new happened in regards to CANopen being made available for the CCS compiler?
_________________
Allen C. Huffman, Sub-Etha Software (est. 1990) http://www.subethasoftware.com
Embedded C, Arduino, MSP430, ESP8266/32, BASIC Stamp and PIC24 programmer.
http://www.whywouldyouwanttodothat.com ?

Using: 24FJ256GA106, 24EP256GP202 and 24FJ64GA002.
Ttelmah



Joined: 11 Mar 2010
Posts: 19803

View user's profile Send private message

PostPosted: Wed Apr 23, 2025 2:45 am     Reply with quote
Depends what you mean by 'available'. The drivers were updated a couple of years later, and have some support for a basic node. There is a GitHub
node available, that translates fairly easily.
allenhuffman



Joined: 17 Jun 2019
Posts: 620
Location: Des Moines, Iowa, USA

View user's profile Send private message Visit poster's website

PostPosted: Wed Apr 23, 2025 7:50 am     Reply with quote
Ttelmah wrote:
Depends what you mean by 'available'. The drivers were updated a couple of years later, and have some support for a basic node. There is a GitHub
node available, that translates fairly easily.


I don’t know about this - GitHub for what project?
_________________
Allen C. Huffman, Sub-Etha Software (est. 1990) http://www.subethasoftware.com
Embedded C, Arduino, MSP430, ESP8266/32, BASIC Stamp and PIC24 programmer.
http://www.whywouldyouwanttodothat.com ?

Using: 24FJ256GA106, 24EP256GP202 and 24FJ64GA002.
Ttelmah



Joined: 11 Mar 2010
Posts: 19803

View user's profile Send private message

PostPosted: Wed Apr 23, 2025 11:47 am     Reply with quote
[url]
https://github.com/CANopenNode/CANopenPIC
[/url]
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group