CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com

Moving up to the Next size chip?

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
soonc



Joined: 03 Dec 2013
Posts: 215

View user's profile Send private message

Moving up to the Next size chip?
PostPosted: Sun Nov 04, 2018 8:31 pm     Reply with quote

Currently I'm working with the PIC18F46K42 and I see the program is growing so I'm considering moving up to PIC18F47K42 which has double ROM and RAM.

The pin out are the same and the compiler compiles the code. I hope the silicon behaves as well as the smaller chip.

Unless I missed it the data sheet does not indicate if the current drawn by the large chip will be more (at the same Vdd and Clk).

Any feedback of practical experience of moving up to the next size chip and if the current draw is much more and by how much ?
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

Re: Moving up to the Next size chip?
PostPosted: Sun Nov 04, 2018 9:20 pm     Reply with quote

soonc wrote:
Currently I'm working with the PIC18F46K42 and I'm considering moving up to PIC18F47K42.
Unless I missed it the data sheet does not indicate if the current drawn by the large chip will be more (at the same Vdd and Clk).

There is Table 44-2 for the '46 chip, and Table 44-3 for the '47 chip.

For example, looking at the gray lines for D100 in each table, it shows
that typical current is 770 ua for the '46 chip, and 825 ua for the larger '47.

http://ww1.microchip.com/downloads/en/DeviceDoc/PIC18LF26-27-45-46-47-55-56-57K42-Data-Sheet-40001919C.pdf
Look on pages 742 and 743 for these tables.
soonc



Joined: 03 Dec 2013
Posts: 215

View user's profile Send private message

Thanks
PostPosted: Tue Nov 06, 2018 10:12 am     Reply with quote

Thanks PCM programmer.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group