CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com

pic16f877a and t6963 glcd c code tested and working

 
Post new topic   Reply to topic    CCS Forum Index -> Code Library
View previous topic :: View next topic  
Author Message
sudarsan



Joined: 08 Nov 2012
Posts: 5
Location: India

View user's profile Send private message

pic16f877a and t6963 glcd c code tested and working
PostPosted: Thu Nov 08, 2012 1:04 am     Reply with quote

Code:

/* main file */
/* copy this code into notepad and save as (urfilename).c  */

#include <16F877a.h>
#Fuses HS,NOWDT,NOPROTECT,NOLVP,NOBROWNOUT
#use delay(clock=20000000)
#include "t6963.h"
#include "t6963.c"

void main()
{
GDispInit();                         //T6963C display initialization
GDispSetMode(XOR_MODE|INT_CG_MODE);  //Exclusive OR mode, internal CG character RAM
GDispSetMode(TEXT_GRH_ON);           //Text ON, Graphics ON
GDispClrTxt();                       //Clear the text area
GDispClrGrh();                       //Clear the graphics area (dot-by-dot!)

while(1)
  {
   GDispGoto(0,0);
   GDispChar(0x85);
  }
}
sudarsan



Joined: 08 Nov 2012
Posts: 5
Location: India

View user's profile Send private message

t6963.c file
PostPosted: Thu Nov 08, 2012 1:07 am     Reply with quote

Code:

/* t6963.c file */
#include "font5x7.h"      //custom-defined 5x7 font, for GDispPixFontAt(...)

/*
***********************************************************************************************
*                              LOCAL CONSTANTS
***********************************************************************************************
*/
#define CURSOR_PTR_SET      0x21    //Cursor Pointer Set
#define OFFSET_REG_SET      0x22    //Set Offset Command
#define ADDR_PTR_SET        0x24    //Set Address Pointer Command
#define TEXT_HOME_SET       0x40    //Text Home Address Set: Data = low, high addr
#define TEXT_AREA_SET       0x41    //Text Area Set: Data = columns, 0
#define GRAPH_HOME_SET      0x42    //Graphics Home address Set: Data = low, high addr
#define GRAPH_AREA_SET      0x43    //Graphics Area Set: Data = columns, 0
#define SCREEN_PEEK         0xE0    //Read data from screen command
#define SCREEN_COPY         0xE8    //Screen Copy
#define AUTO_WR_ON            0xB0
#define DATA_AUTO_RD          0xB1
#define AUTO_WR_OFF           0xB2
#define DATA_WR_INC         0xC0      // Data write and increment addrespointer
#define DATA_RD_INC         0xC1      // Data read and increment  addrespointer
#define DATA_WR_DEC         0xC2      // Data write and decrement addrespointer
#define DATA_RD_DEC         0xC3      // Data read and decrement  addrespointer
#define DATA_WR             0xC4      // Data write - no addr change
#define DATA_RD             0xC5      // Data read  - no addr change



/*
*********************************************************************************************************
*                           LOCAL FUNCTION PROTOTYPES
*********************************************************************************************************
*/
static void GDispCmdAddrSend(unsigned int16 Addr, unsigned char cmd);

/*
*********************************************************************************************************
*                                     SEND ADDRESS COMMAND
*
* Description : This function sends screen address with a command to the LCD screen
* Arguments   : 'Addr'  is the screen address to send
*            'cmd'   is the command
* Returns     : none
* Notes        : Most often a graphic LCD needs a screen address for command setup.
*            Example, set Graph Home Address is the command GRAPH_HOME_SET (0x42), at the ram address
*            GRH_HOME_ADDR (0x0200), say.
*********************************************************************************************************
*/
static void GDispCmdAddrSend(unsigned int16 Addr, unsigned char cmd)
{   
   unsigned int8 c;

   c = Addr&0x00FF;
      GDispDataWr(c);      //Send LSB of 'Addr' first
   c = Addr >> 8;
      GDispDataWr(c);      //Send MSB of 'Addr' afterwards
      GDispCmdSend(cmd);
}


/*
*********************************************************************************************************
*                                     DISPLAY DRIVER INITIALIZATION
*
* Description : This function initializes the display driver
* Arguments   : none
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispInit(void)
{
   //Reset the LCD module and perform a hardware port init
   GDispInitPort();
   //Set Text Home address to TEXT_HOME_ADDR
      GDispCmdAddrSend(TEXT_HOME_ADDR,TEXT_HOME_SET);
   //Set Graph Home address to GRH_HOME_ADDR
      GDispCmdAddrSend(GRH_HOME_ADDR,GRAPH_HOME_SET);
   //Set Text Area to COLUMN column mode
      GDispCmdAddrSend(COLUMN,TEXT_AREA_SET);
   //Set Graph Area to COLUMN column mode
      GDispCmdAddrSend(COLUMN,GRAPH_AREA_SET);
   //Set Offset register to 0x0002, CG Ram start address = $1400 (CG_HOME_ADDR)
   //first character code $80 for CG Ram
      GDispCmdAddrSend(0x0002,OFFSET_REG_SET);
}

/*
*********************************************************************************************************
*                               SET MODE FOR DISPLAY/MODE/CURSOR/TEXT_ATTRIBUTE
*
* Description : This function sets mode
* Arguments   : 'mode'   , refer to mode available in t6963.h, MODE Section, CURSOR MODE, TEXT ATTRI
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispSetMode(unsigned int8 mode)
{
   GDispCmdSend(mode);
}

/*
*********************************************************************************************************
*                                        CLEAR TEXT SCREEN
*
* Description : This function clears the text clear in font mode
* Arguments   : none
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispClrTxt(void)
{
    unsigned int16 row;
   unsigned int16 col;

   //Set address pointer to address (TEXT_HOME_ADDR)
   GDispCmdAddrSend(TEXT_HOME_ADDR,ADDR_PTR_SET);
   //Set Auto Write ON
   GDispCmdSend(AUTO_WR_ON);

         //row runs from 0 ... (MAX_ROW_PIXEL/8 -1), in form of a cell of (FontSize x 8) bits
   for(row=0; row < MAX_ROW_PIXEL/8; row++)
   {      //write blank to clear screen the first page only, col = 0...(COLUMN-1)
   for(col=0; col < COLUMN; col++)
   {
         GDispAutoDataWr(0x00);
   }
   }
   //Set Auto Write OFF
   GDispCmdSend(AUTO_WR_OFF);
}

/*
*********************************************************************************************************
*                                     CLEAR THE GRAPHIC AREA
*
* Description : This function clears the graphic area pixel by pixel
* Arguments   : none
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispClrGrh(void)
{
   unsigned int16 row;
   unsigned int16 col;

   //Set address pointer to address (GRH_HOME_ADDR)
   GDispCmdAddrSend(GRH_HOME_ADDR, ADDR_PTR_SET);
   GDispCmdSend(AUTO_WR_ON);
      //row runs from 0 ... (MAX_ROW_PIXEL-1), in form of a byte size of (FontSize x 1) bits
   for(row=0; row < MAX_ROW_PIXEL; row++)
   {   //write blank to clear screen the first page only, col = 0...(COLUMN-1)
   for (col=0; col < COLUMN; col++)
      {
         GDispAutoDataWr(0x00);
      }
   }
      GDispCmdSend(AUTO_WR_OFF);   //Set Auto Write OFF
}


/*
*********************************************************************************************************
*                                       GOTO A POSITION (row, col)
*
* Description : This function sets the screen address pointer to a position row, col
* Arguments   : 'row'   row = 0...(MAX_ROW_PIXEL/8 - 1), the cell number in 8 bits height
*            'col'   col = 0...(COLUMN-1), is the column position in font width (6/8 font)
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispGoto(unsigned int16 row, unsigned int16 col)
{
   unsigned int16 addr;

   addr = row*COLUMN + col + TEXT_HOME_ADDR;
   GDispCmdAddrSend(addr,ADDR_PTR_SET);                     //Set address pointer
}


/*
*********************************************************************************************************
*                     DISPLAY A CHARACTER AT THE CURRENT SCREEN ADDRESS POINTER
*
* Description : This function is used to display a single character on the display device at row, col
*            col, row should have been set by GDispGoto(row, col) before. AUTO ADDRESS POINTER INC!
* Arguments   :   'c'     is the ASCII character to write
* Returns     : none
* Notes        : This function gets around the problem that pointers cannot be created to constant string
*            in PCM. Referring to CCS Reference Manual (page 67), a function that has one CHAR
*            parameter will accept a constant string where it is called. PCM will generate a loop
*            that will call the function once for each character in the string.
*            Example :
*               GDispGoto(5,5);
*               GDispChar("Hello there!");
*********************************************************************************************************
*/
void GDispChar(unsigned char c)
{                           
      GDispDataWr(c - 0x20);               //Adjust standard ASCII to T6963 ASCII
   GDispCmdSend(DATA_WR_INC);            //Address pointer increment ON
}


/*
*********************************************************************************************************
*                              DISPLAY A CHARACTER AT A POSITION (row, col)
*
* Description : This function is used to display a single character on the display device, address
*            auto increment OFF!
* Arguments   : 'row'   row = 0...(MAX_ROW_PIXEL/8 - 1), the row pos of the cursor (MAX_ROW_PIXEL/8-1)
*            'col'   col = 0...(COLUMN-1), is the column position in font width (6/8 font)
*            'c'     is the ASCII character to write
* Returns     : none
* Notes        : COLUMN constant determines the number of page, can be > physical size of the LCD
*********************************************************************************************************
*/
void GDispCharAt(unsigned int16 row, unsigned int16 col, unsigned char c )
{
      GDispGoto(row, col);                                     
   GDispDataWr(c - 0x20);
   GDispCmdSend(DATA_WR);
}


/*
*********************************************************************************************************
*                                     SET CURSOR AT A POSITION
*
* Description : This function sets cursor at a position (row, col), of certain mode & type
* Arguments   : 'mode' is the mode of cursor. It should be bitwise OR with a TEXT / GRAPH mode to work
*                   mode =    TEXT_GRH_ON|CURSOR_BLINK_ON
*                        TEXT_ON|CURSOR_ON_BLINK_OFF....
*                        TEXT_ON, without bitwise OR any cursor mode only will clear cursor
*            'row'  is the MSB of screen address, the row position of the cursor
*            'col'  is the LSB of the screen address, the column position of the cursor
*            'type' is cursor type
*                  type = LINE_1_CURSOR / LINE_8_CURSOR
* Returns     : none
* Notes        : Cursor address is not like text address pointer. Cannot use GDispGoto(row,col).
*********************************************************************************************************
*/
void GDispSetCursor(unsigned int8 mode, unsigned int16 row, unsigned int16 col, unsigned int8 type)
{
   unsigned int16 addr;

   addr = row << 8;
   addr = addr|(col&0x00FF);
      GDispCmdAddrSend(addr, ADDR_PTR_SET);
      GDispCmdSend(CURSOR_PTR_SET);        //Set cursor position
   GDispCmdSend(mode);
      GDispCmdSend(type);             //cursor mode
}


/*
*********************************************************************************************************
*                                     SET PIXEL AT X, Y POSITION
*
* Description : This function sets a pixel with color = BLACK / WHITE (defined in t6963.h)
* Arguments   : 'X'    0....MAX_COL_PIXEL is matrix position in horizontal direction
*            'Y     0....MAX_ROW_PIXEL is matrix position in vertical direction
*            'color'  sets BLACK / WHITE standing for pixel ON/OFF
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispSetPixel(unsigned int16 X, unsigned int16 Y, unsigned int8 color)
{
   unsigned int16 addr;
   unsigned int16 row, col;
   unsigned char cmd;

      row = Y;
      col = X/8;
         addr = row*COLUMN + col + GRH_HOME_ADDR;
      GDispCmdAddrSend(addr, ADDR_PTR_SET);

      if (color == BLACK)
         cmd = (0b11111000)|(8- 1 -(X%8));
      else
         cmd = (0b11110000)|(8- 1 -(X%8));

      GDispCmdSend(cmd);
}

void glcd_3Dbox(int16 x,int16 y,int16 width, int16 height, int depth, int1 color)
{
   int16 i,j;
   for(i=x;i<=x+width;i++)
   {
      GDispSetPixel(i,y,1);
      GDispSetPixel(i,y+height,1);
   }
   for(i=y;i<=y+height;i++)
   {
     GDispSetPixel(x,i,1);
     GDispSetPixel(x+width,i,1);
   }
   for(j=1;j<=depth;j++)
   {
      for(i=y+j;i<=y+height+j;i++)
      {
         GDispSetPixel(x-j,i,1);
      }
   }
   for(j=1;j<=depth;j++)
   {
      for(i=x-j;i<=(x-j+width);i++)
      {
         GDispSetPixel(i,y+height+j,color);
      }
   }
}
/*
*********************************************************************************************************
*                               SET TEXT ATTRIBUTE (NOT COMPLETE DEBUG)
*
* Description : This function sets / clears text attribute mode
* Arguments   : 'row'   row = 0...(MAX_ROW_PIXEL/8 - 1), the row pos of the cursor (MAX_ROW_PIXEL/8-1)
*            'col'   col = 0...(COLUMN-1), is the column position in font width (6/8 font)
*            'mode'  =    ATTR_REVERSE, ATTR_INHIBIT, ATTR_BLINK_REVERSE, ATTR_BLINK_INHIBIT...
*                     (see TEXT ATTRIBUTE MODE in t6963.h for available mode)
* Returns     : none
* Notes        : After function call to GDispSetAttrb(row,col,ATTR_BLINK_REVERSE),
*            should use GDispSetAttrib(row,col, ATTR_NORMAL) before using graphic area again to avoid
*            graphic area data write error!
*********************************************************************************************************
*/

void GDispSetAttrb(unsigned int16 row, unsigned int16 col, unsigned int8 mode)
{
   unsigned int16 addr;

      addr = row*COLUMN + col + GRH_HOME_ADDR;
   GDispCmdAddrSend(addr, ADDR_PTR_SET);
   GDispCmdSend(AUTO_WR_ON);
   GDispAutoDataWr(mode);
   GDispCmdSend(AUTO_WR_OFF);
   GDispCmdSend(TEXT_ATTR_MODE);
   GDispCmdSend(TEXT_GRH_ON);
}


/*
*********************************************************************************************************
*                                  SET CUSTOM DEFINED CHARACTER TO CG RAM
*
* Description : This function assigns a custom created pattern of 8 BYTE with an id number
* Arguments   : 'id'   is the identifier for the pattern created. Range of 'id' is 0...127 for T6963.
*            'pat'    is a pointer to an 8 BYTE array containing the dot pattern
* Returns     : none
* Notes        : Pointers cannot be created to constant arrays in PCM. Thus, a global CGBuffer[]'s created
*            in t6963.h to store a constant array to RAM space.
*            Code Example   ::
*
*            char i;
*            const char CUSTOM_PAT[8] = {0x00, 0x23, 0x45, 0x56, 0x89, 0xAB, 0xFF, 0xEE};
*            for(i=0;i<8;i++) CGBuffer[i] = CUSTOM_PAT[i]   //assign CUSTOM_PAT[] to CGBuffer[]
*            GDispDefCGChar(0, &CGBuffer[0]);            //create a pattern in CG RAM with id '0'
*********************************************************************************************************
*/
void GDispDefCGChar(unsigned int8 id, unsigned char *pat)
{   
   unsigned int8 i;

   GDispCmdAddrSend(CG_HOME_ADDR+(unsigned int16)id*8, ADDR_PTR_SET);

   for(i=0; i<8; i++)
   {
      GDispDataWr(*pat++);
      GDispCmdSend(DATA_WR_INC);
   }
}

/*
*********************************************************************************************************
*                DISPLAY AN EXTERNAL CG CHARACTER AT THE CURRENT SCREEN ADDRESS POINTER
*
* Description : This function shows a pre-defined CG RAM character at the current screen address pointer
* Arguments   : 'id'   is the identifier for the pattern created. Range of 'id' is 0...127 for T6963.
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispCGChar(unsigned int8 id)
{
   GDispDataWr(0x80 + id);               //Adjust standard ASCII to T6963 ASCII
   GDispCmdSend(DATA_WR_INC);            //'0x80 + id's range 0 to 255, good for GDispDataWr(char)
}

/*
*********************************************************************************************************
*                         DISPLAY AN EXTERNAL CG CHARACTER AT ROW, COL
*
* Description : This function shows a pre-defined CG RAM character at (row, col) coordinates
* Arguments   : 'id'   is the identifier for the pattern created. Range of 'id' is 0...127 for T6963.
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispCGCharAt(unsigned int16 row, unsigned int16 col, unsigned int8 id)
{
   GDispGoto(row,col);
   GDispCGChar(id);
}


/*
*********************************************************************************************************
*                            DISPLAY A BLANK ICON OF 32x32 MATRIX AT ROW, COL
*
* Description : This function clears the 32x32 ICON at (row, col) coordinates
* Arguments   : 'row'   row = 0...(MAX_ROW_PIXEL/8 - 1), the row pos of the cursor (MAX_ROW_PIXEL/8-1)
*            'col'   col = 0...(COLUMN-1), is the column position in font width (6/8 font)
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispBlkIcon32X32At(unsigned int16 row, unsigned int16 col)
{
   unsigned int16 row_cnt, col_cnt;

   GDispGoto(row, col);
   for(row_cnt = row; row_cnt < (row+4); row_cnt++)
   {
      for(col_cnt = col; col_cnt < (col+4); col_cnt++)
      {
         GDispCharAt(row_cnt, col_cnt, ' ');
      }
   }
}


/*
*********************************************************************************************************
*                  CONVERT A STRING TO PIXEL DATA AND DISPLAY AT X,Y IN GRAPHIC MODE
*
* Description : This function outputs a string in graphic mode from a char* textptr pointer
* Arguments   : 'X'          0....MAX_COL_PIXEL is matrix position in horizontal direction
*            'Y           0....MAX_ROW_PIXEL is matrix position in vertical direction
*            'textptr'   pointer to the string to write
*            'size'      should be non-zero, 1 = 5x7, 2 = 10x14, ..., basically "enlarge" the font
*                     defined under font5x7.h.
*            'color'      BLACK / WHITE
* Returns     : none
* Notes        : Copyright (c) 2004 Sentinel Systems Corporation
*            Example, declare a string
*            .
*            char str[] = "Hello World!";
*            .
*            .
*            main()
*            {
*               GDispPixFontAt(0,20,&str[0],2,BLACK); //Display the "Hello World!" string starting
*                                            //at (x,y)=(0,20), in size font size 2 (10x14)
*                                            //color in black 
*            }
*********************************************************************************************************
*/
void GDispPixFontAt(unsigned int16 X, unsigned int16 Y, unsigned char* textptr, unsigned char size, int1 color)
{
   const BYTE bytes_per_char = 5;
   int i, j, k, l, m;                         // Loop counters
   BYTE pixelData[bytes_per_char];             // Stores character data

   for(i=0; textptr[i] != '\0'; ++i, ++X)          // Loop through the passed string
   {
      if(textptr[i] < 'S')                   // Checks if the letter is in the first or second array
      memcpy(pixelData, FONT1[textptr[i]-' '], bytes_per_char);
      else if(textptr[i] <= '~')                // Check if the letter is in the second array
      memcpy(pixelData, FONT2[textptr[i]-'S'], bytes_per_char);
      else                               // Default to space if character out of range
      memcpy(pixelData, FONT1[0], bytes_per_char); 

      if(X+5*size >= MAX_COL_PIXEL)             // Performs character wrapping
      {
         X = 0;                            // Set X at far left position
         Y += 7*size + 1;                   // Set Y at next position down
      }
      for(j=0; j<bytes_per_char; ++j, X+=size)    // 5 bytes per character
      {
         for(k=0; k<7*size; ++k)             // Loop through the vertical pixels
         {
         if(bit_test(pixelData[j], k))          // Check if the pixel should be set
         {
            for(l=0; l<size; ++l)             // The next two loops change the character's size
            {
               for(m=0; m<size; ++m)
               {                         // Draws the pixel
                  GDispSetPixel(X+m, Y+k*size+l, color);
               }
            }
         }
         }
      }
   } //for(i = 0; textptr[i] != '\0';...)
}


/*
*********************************************************************************************************
*                                      I/O PORT INITIALIZATION
*
* Description : This initializes the I/O ports used by the display driver
* Arguments   : none
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispInitPort(void)
{
    LCD_RST = 0;
   LCD_CD = 1;
   LCD_CE = 1;
   LCD_RD = 1;
   LCD_WR = 1;
   LCD_DATA = 0x00;
      //Set all control line as output
      LCD_CE_TRIS = 0;
      LCD_RD_TRIS = 0;
      LCD_CD_TRIS = 0;
      LCD_WR_TRIS = 0;
      LCD_RST_TRIS = 0;
      LCD_DATA_TRIS = 0x00;
      //Turn on LCD module after reset
     #asm
      nop
   #endasm
      LCD_RST=1;
}


/*
*********************************************************************************************************
*                                          BUSY CHECK
*
* Description : This function checks command execution capability, & data read/write capability
* Arguments   : none
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispBusyChk(void)
{
   GDispCmdRd;
     GDispChipEn;
     #asm
      nop
     #endasm
     while (!STA0)         // Busy Check here
      ;
     while (!STA1)
         ;
     GDispChipDi;         //Chip disable to finish
}

/*
*********************************************************************************************************
*                                       AUTO MODE DATA WRITE CHECK
*
* Description : This function checks auto mode data write capability
* Arguments   : none
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispAutoWrChk(void)
{
   GDispCmdRd;
   GDispChipEn;
   #asm
      nop
   #endasm
   while(!STA3)
      ;
   GDispChipDi;
}

/*
*********************************************************************************************************
*                                          WRITE DATA TO LCD MODULE
*
* Description : This function sends a single data byte to the display device
* Arguments   : 'data' is the BYTE to send to the display device
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispDataWr(unsigned char data)
{
  GDispBusyChk();             // Wait for LCD to be ready

  LCD_DATA = data;               // Data write
  #asm
   nop
  #endasm
  GDispDatWr;
  GDispChipEn;
  #asm               
   nop                     //delay one cycle for port stablize
  #endasm
  GDispChipDi;
}


/*
*********************************************************************************************************
*                        WRITE DATA TO LCD MODULE, SCREEN ADRESS AUTO-INCREMENTED
*
* Description : Send a single data byte to the screen with screen address auto'ly incremented
* Arguments   : 'data' is the BYTE to send to the display device
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispAutoDataWr(unsigned char data)
{
  GDispAutoWrChk();             // Auto write mode check

  LCD_DATA = data;               // Data write
  #asm
   nop
  #endasm
  GDispDatWr;
  GDispChipEn;
  #asm               
   nop                     //delay one cycle for port stablize
  #endasm
  GDispChipDi;
}


/*
*********************************************************************************************************
*                                       WRITE COMMAND TO LCD MODULE
*
* Description : This function sends a single byte as command to the display device
* Arguments   : 'cmd' is the COMMAND BYTE to send to the display device
* Returns     : none
* Notes        :
*********************************************************************************************************
*/
void GDispCmdSend(unsigned char cmd)
{
     GDispBusyChk();         // Wait for LCD to be ready
     LCD_DATA = cmd;
   GDispCmdWr;
     GDispChipEn;
     #asm
      nop
   #endasm       
     GDispChipDi;
}


Last edited by sudarsan on Thu Nov 08, 2012 1:10 am; edited 1 time in total
sudarsan



Joined: 08 Nov 2012
Posts: 5
Location: India

View user's profile Send private message

t6963.h file
PostPosted: Thu Nov 08, 2012 1:09 am     Reply with quote

Code:
/*
***********************************************************************************************
*                              PORT DEFINITION
***********************************************************************************************
*/
#byte   PORTA   =   0x05
#byte   TRISA   =   0x85
#bit   PORTA0   =   PORTA.0

#bit   PORTA1   =   PORTA.1
#bit   PORTA2   =   PORTA.2
#bit   PORTA3   =   PORTA.3
#bit   PORTA4   =   PORTA.4
#bit   PORTA5   =   PORTA.5
#bit   TRISA0   =   TRISA.0
#bit   TRISA1   =   TRISA.1
#bit   TRISA2   =   TRISA.2
#bit   TRISA3   =   TRISA.3
#bit   TRISA4   =   TRISA.4
#bit   TRISA5   =   TRISA.5

#byte   PORTB   =   0x06
#byte   TRISB   =   0x86
#bit   PORTB0   =   PORTB.0
#bit   PORTB1   =   PORTB.1
#bit   PORTB2   =   PORTB.2
#bit   PORTB3   =   PORTB.3
#bit   PORTB4   =   PORTB.4
#bit   PORTB5   =   PORTB.5
#bit   PORTB6   =   PORTB.6
#bit   PORTB7   =   PORTB.7
#bit   TRISB0   =   TRISB.0
#bit   TRISB1   =   TRISB.1
#bit   TRISB2   =   TRISB.2
#bit   TRISB3   =   TRISB.3
#bit   TRISB4   =   TRISB.4
#bit   TRISB5   =   TRISB.5
#bit   TRISB6   =   TRISB.6
#bit   TRISB7   =   TRISB.7

#byte   PORTC   =   0x07
#byte   TRISC   =   0x87
#bit   PORTC0   =   PORTC.0
#bit   PORTC1   =   PORTC.1
#bit   PORTC2   =   PORTC.2
#bit   PORTC3   =   PORTC.3
#bit   PORTC4   =   PORTC.4
#bit   PORTC5   =   PORTC.5
#bit   PORTC6   =   PORTC.6
#bit   PORTC7   =   PORTC.7
#bit   TRISC0   =   TRISC.0
#bit   TRISC1   =   TRISC.1
#bit   TRISC2   =   TRISC.2
#bit   TRISC3   =   TRISC.3
#bit   TRISC4   =   TRISC.4
#bit   TRISC5   =   TRISC.5
#bit   TRISC6   =   TRISC.6
#bit   TRISC7   =   TRISC.7

#byte   PORTD   =   0x08
#byte   TRISD   =   0x88
#bit   PORTD0   =   PORTD.0
#bit   PORTD1   =   PORTD.1
#bit   PORTD2   =   PORTD.2
#bit   PORTD3   =   PORTD.3
#bit   PORTD4   =   PORTD.4
#bit   PORTD5   =   PORTD.5
#bit   PORTD6   =   PORTD.6
#bit   PORTD7   =   PORTD.7
#bit   TRISD0   =   TRISD.0
#bit   TRISD1   =   TRISD.1
#bit   TRISD2   =   TRISD.2
#bit   TRISD3   =   TRISD.3
#bit   TRISD4   =   TRISD.4
#bit   TRISD5   =   TRISD.5
#bit   TRISD6   =   TRISD.6
#bit   TRISD7   =   TRISD.7

#byte    PORTE   =   0x09
#byte   TRISE   =   0x89
#bit   PORTE0   =   PORTE.0
#bit   PORTE1   =   PORTE.1
#bit   PORTE2   =   PORTE.2
#bit   TRISE0   =   TRISE.0
#bit   TRISE1   =   TRISE.1
#bit   TRISE2   =   TRISE.2

//I/O port for data definition
#ifndef T6963_H
#define T6963_H

#define LCD_DATA         PORTD      // LCD data port
#define LCD_DATA_TRIS      TRISD      // LCD Data port Tris
#define STA0            PORTD0      // Check command execution capability
#define STA1            PORTD1      // Check data read/write capability
#define STA2            PORTD2      // Check Auto mode data read capability
#define STA3            PORTD3      // Check Auto mode data write capability
#define STA5            PORTD5      // Check controller operation capability
#define STA6            PORTD6      // Error flag. Used for screen peek and screen copy
#define STA7            PORTD7      // Check the blink condition

//Control pin setting
#define LCD_CE            PORTC2      // LCD Enable control line pin number
#define LCD_CE_TRIS        TRISC2      // LCD Enable control line direction pin #
#define LCD_RD            PORTC1      // LCD Read control line  pin number
#define LCD_RD_TRIS          TRISC1      // LCD Read control line direction pin #
#define LCD_WR            PORTC0      // LCD Write control line pin number
#define LCD_WR_TRIS          TRISC0      // LCD Write control line irection pin #
#define LCD_CD            PORTB7      // LCD Control/data Select line
#define LCD_CD_TRIS          TRISB7      // LCD Control/data Select line direction
#define LCD_RST             PORTB6      // LCD RST_ line
#define LCD_RST_TRIS      TRISB6      // LCD RST_line direction
#endif

/*
***********************************************************************************************
*                              GLOBAL CONSTANTS
***********************************************************************************************
*/

/*
***********************************************************************************************
* Note      :    The T6963 controller's RAM address space from $0000 - $FFFF, total 64kbyte RAM.
*            It is just the RAM address set, not the actual RAM amount can be set!
*            However, everything manufacturer may mount different amount of RAM on its
*            module. Example, Powertip's PG12864-F has 4 kbyte RAM only.
*            RAM space to handle 128x64 dots in 8 font = 128x64/8 = 1,024 byte.
*            Thus, the LCD's actual visible screen area is 1 kbyte.
*            For 8-font, 16 COLUMN,
*            TEXT_HOME_ADDR    starts 0x0000 ending 0x01FF -> 512  bytes (for text use)?
*            GRH_HOME_ADDR   starts 0x0200 ending 0x05FF -> 1,024 bytes ?
*            CG_HOME_ADDR   starts 0x1400 ending 0x147F   -> 128  bytes (custom characters) ?
***********************************************************************************************
*/
#define TEXT_HOME_ADDR      0x0000
#define GRH_HOME_ADDR       0x0200
#define CG_HOME_ADDR      0x1400
#define COLUMN            30      //Set column number to be e.g. 32 for 8x8 fonts, 2 pages
#define MAX_ROW_PIXEL      64      //MAX_ROW_PIXEL the physical matrix length (y direction)                           
#define MAX_COL_PIXEL      240   //MAX_COL_PIXEL the physical matrix width (x direction)
#define ENABLE            1
#define DISABLE            0
#define BLACK            1
#define WHITE            0

/*
***********************************************************************************************
*                              DISPLAY MODE
***********************************************************************************************
*/
#define DISPLAY_OFF         0x90    //0b10010000, display off
#define CURSOR_ON_BLINK_OFF 0x92    //0b1001xx10, cursor on without blinking
#define CURSOR_BLINK_ON     0x93    //0b1001xx11, cursor on with blinking
#define TEXT_ON             0x94    //0b100101xx, text on, graphics off
#define GRAPHIC_ON          0x98    //0b100110xx, text off, graphics on
#define TEXT_GRH_ON         0x9C    //0b100111xx, text on, graphics on


/*
***********************************************************************************************
*                                 MODE
***********************************************************************************************
*   Example:    OR_MODE|EXT_CG_MODE    ->    OR mode, external CG ram mode
*            AND_MODE            ->    AND mode, internal CG ROM mode
***********************************************************************************************
*/
/*
***********************************************************************************************
*      In internal CG ROM MODE (INT_CG_MODE), character codes 00h - 7Fh represent the
*      pre-defined "internal" CG ROM characters, and codes 80h - FFh represent the
*      users' own "external" characters. In external CG ROM MODE (EXT_CG_MODE),
*      all 256 codes from 00h - FFh can be used to represent the users' own characters.
***********************************************************************************************
*/

#define INT_CG_MODE         0x80    //0b10000xxx, Internal CG ROM mode
#define EXT_CG_MODE         0x88    //0b10001xxx, External CG RAM mode
#define OR_MODE             0x80    //0b1000x000, OR mode, internal CG ROM mODE
#define XOR_MODE            0x81    //0b1000x001, XOR mode, internal CG ROM mode
#define AND_MODE            0x83    //0b1000x011, AND mode, internal CG ROM mode
#define TEXT_ATTR_MODE      0x84    //0b1000x100, text attribute mode, internal CG ROM mode



/*
***********************************************************************************************
*                              CURSOR MODE
***********************************************************************************************
*/
#define LINE_8_CURSOR       0xA7    //8-line cursor mode
#define LINE_7_CURSOR      0xA6   //7-line cursor mode
#define LINE_6_CURSOR      0xA5   //6-line cursor mode
#define LINE_5_CURSOR      0xA4   //5-line cursor mode
#define LINE_4_CURSOR      0xA3   //4-line cursor mode
#define LINE_3_CURSOR      0xA2   //3-Line cursor mode
#define LINE_2_CURSOR      0xA1   //2-Line cursor mode
#define LINE_1_CURSOR       0xA0    //1-Line cursor mode

/*
***********************************************************************************************
*                           TEXT ATTRIBUTE MODE
***********************************************************************************************
*/
#define ATTR_NORMAL         0x00    //Normal Display
#define ATTR_REVERSE        0x05    //Reverse Display
#define ATTR_INHIBIT        0x03    //Inhibit Display
#define ATTR_BLINK          0x08    //Blinking of Normal Display
#define ATTR_BLINK_REVERSE  0x0D    //Blinking of Reverse Display
#define ATTR_BLINK_INHIBIT  0x0B    //Blinking of Inhibit Display


/*
***********************************************************************************************
*                             GLOBAL VARIABLES
***********************************************************************************************
*/
 unsigned int8    DisplayMode;   /* Keeps state of the display mode (DISPLAY MODE)    */
 unsigned int8   Mode;         /* Keeps state of the MODE                     */
// extern unsigned const   FontSize;      /* 6 font or 8 font                           */
 unsigned char   CGBuffer[8];   /* Buffer for custom pattern                  */

/*
***********************************************************************************************
*                           FUNCTION PROTOTYPES
***********************************************************************************************
*/
void GDispInit(void);
void GDispSetMode(unsigned int8 mode);
void GDispClrTxt(void);
void GDispClrGrh(void);
void GDispGoto(unsigned int16 row, unsigned int16 col);
void GDispChar(unsigned char c);
void GDispCharAt(unsigned int16 row, unsigned int16 col, unsigned char c);
void GDispSetCursor(unsigned int8 mode, unsigned int16 row, unsigned int16 col, unsigned int8 type);
void GDispSetPixel(unsigned int16 X, unsigned int16 Y, unsigned int8 color);
void GDispSetAttrb(unsigned int16 row, unsigned int16 col, unsigned int8 mode);
void GDispDefCGChar(unsigned int8 id, unsigned char *pat);
void GDispCGChar(unsigned int8 id);
void GDispCGCharAt(unsigned int16 row, unsigned int16 col, unsigned int8 id);
void GDispBlkIcon32X32At(unsigned int16 row, unsigned int16 col);
void GDispPixFontAt(unsigned int16 X, unsigned int16 Y, unsigned char* textptr, unsigned char size, int1 color);
void glcd_3Dbox(int16 x,int16 y,int16 width, int16 height, int depth, int1 color);

/*
***********************************************************************************************
*                           FUNCTION PROTOTYPES
*                            HARDWARE SPECIFIC
***********************************************************************************************
*/
#define GDispChipEn      LCD_CE = 0               /* Low level Chip Enable macro          */
#define GDispChipDi      LCD_CE = 1               /* Low level Chip Disable macro       */
#define GDispCmdWr      LCD_DATA_TRIS = 0x00;   \
                  LCD_RD = 1; LCD_CD = 1; \
                  LCD_WR = 0                 /* Low level command write macro      */
#define GDispCmdRd      LCD_DATA_TRIS = 0xFF;    \
                  LCD_RD = 0; LCD_CD = 1; \
                  LCD_WR = 1               /* Low level command read macro         */
#define GDispDatWr      LCD_DATA_TRIS = 0x00;   \
                  LCD_RD = 1; LCD_CD = 0; \   
                  LCD_WR = 0               /* Low level data write macro         */
#define GDispDatRd      LCD_CD = 0; LCD_WR = 1      /* Low level data read macro         */

void GDispInitPort(void);
void GDispBusyChk(void);
void GDispAutoWrChk(void);
void GDispDataWr(unsigned char data);
void GDispAutoDataWr(unsigned char data);
void GDispCmdSend(unsigned char cmd);
sudarsan



Joined: 08 Nov 2012
Posts: 5
Location: India

View user's profile Send private message

font 5x7.h
PostPosted: Thu Nov 08, 2012 1:11 am     Reply with quote

Code:

const unsigned char FONT1[51][5] =
{
0x00, 0x00, 0x00, 0x00, 0x00, // SPACE
0x00, 0x00, 0x5F, 0x00, 0x00, // !
0x00, 0x03, 0x00, 0x03, 0x00, // "
0x14, 0x3E, 0x14, 0x3E, 0x14, // #
0x24, 0x2A, 0x7F, 0x2A, 0x12, // $
0x43, 0x33, 0x08, 0x66, 0x61, // %
0x36, 0x49, 0x55, 0x22, 0x50, // &
0x00, 0x05, 0x03, 0x00, 0x00, // '
0x00, 0x1C, 0x22, 0x41, 0x00, // (
0x00, 0x41, 0x22, 0x1C, 0x00, // )
0x14, 0x08, 0x3E, 0x08, 0x14, // *
0x08, 0x08, 0x3E, 0x08, 0x08, // +
0x00, 0x50, 0x30, 0x00, 0x00, // ,
0x08, 0x08, 0x08, 0x08, 0x08, // -
0x00, 0x60, 0x60, 0x00, 0x00, // .
0x20, 0x10, 0x08, 0x04, 0x02, // /
0x3E, 0x51, 0x49, 0x45, 0x3E, // 0
0x04, 0x02, 0x7F, 0x00, 0x00, // 1
0x42, 0x61, 0x51, 0x49, 0x46, // 2
0x22, 0x41, 0x49, 0x49, 0x36, // 3
0x18, 0x14, 0x12, 0x7F, 0x10, // 4
0x27, 0x45, 0x45, 0x45, 0x39, // 5
0x3E, 0x49, 0x49, 0x49, 0x32, // 6
0x01, 0x01, 0x71, 0x09, 0x07, // 7
0x36, 0x49, 0x49, 0x49, 0x36, // 8
0x26, 0x49, 0x49, 0x49, 0x3E, // 9
0x00, 0x36, 0x36, 0x00, 0x00, // :
0x00, 0x56, 0x36, 0x00, 0x00, // ;
0x08, 0x14, 0x22, 0x41, 0x00, // <
0x14, 0x14, 0x14, 0x14, 0x14, // =
0x00, 0x41, 0x22, 0x14, 0x08, // >
0x02, 0x01, 0x51, 0x09, 0x06, // ?
0x3E, 0x41, 0x59, 0x55, 0x5E, // @
0x7E, 0x09, 0x09, 0x09, 0x7E, // A
0x7F, 0x49, 0x49, 0x49, 0x36, // B
0x3E, 0x41, 0x41, 0x41, 0x22, // C
0x7F, 0x41, 0x41, 0x41, 0x3E, // D
0x7F, 0x49, 0x49, 0x49, 0x41, // E
0x7F, 0x09, 0x09, 0x09, 0x01, // F
0x3E, 0x41, 0x41, 0x49, 0x3A, // G
0x7F, 0x08, 0x08, 0x08, 0x7F, // H
0x00, 0x41, 0x7F, 0x41, 0x00, // I
0x30, 0x40, 0x40, 0x40, 0x3F, // J
0x7F, 0x08, 0x14, 0x22, 0x41, // K
0x7F, 0x40, 0x40, 0x40, 0x40, // L
0x7F, 0x02, 0x0C, 0x02, 0x7F, // M
0x7F, 0x02, 0x04, 0x08, 0x7F, // N
0x3E, 0x41, 0x41, 0x41, 0x3E, // O
0x7F, 0x09, 0x09, 0x09, 0x06, // P
0x1E, 0x21, 0x21, 0x21, 0x5E, // Q
0x7F, 0x09, 0x09, 0x09, 0x76  // R
};

const unsigned char FONT2[44][5]=
{
0x26, 0x49, 0x49, 0x49, 0x32, // S
0x01, 0x01, 0x7F, 0x01, 0x01, // T
0x3F, 0x40, 0x40, 0x40, 0x3F, // U
0x1F, 0x20, 0x40, 0x20, 0x1F, // V
0x7F, 0x20, 0x10, 0x20, 0x7F, // W
0x41, 0x22, 0x1C, 0x22, 0x41, // X
0x07, 0x08, 0x70, 0x08, 0x07, // Y
0x61, 0x51, 0x49, 0x45, 0x43, // Z
0x00, 0x7F, 0x41, 0x00, 0x00, // [
0x02, 0x04, 0x08, 0x10, 0x20, // \
0x00, 0x00, 0x41, 0x7F, 0x00, // ]
0x04, 0x02, 0x01, 0x02, 0x04, // ^
0x40, 0x40, 0x40, 0x40, 0x40, // _
0x00, 0x01, 0x02, 0x04, 0x00, // `
0x20, 0x54, 0x54, 0x54, 0x78, // a
0x7F, 0x44, 0x44, 0x44, 0x38, // b
0x38, 0x44, 0x44, 0x44, 0x44, // c
0x38, 0x44, 0x44, 0x44, 0x7F, // d
0x38, 0x54, 0x54, 0x54, 0x18, // e
0x04, 0x04, 0x7E, 0x05, 0x05, // f
0x08, 0x54, 0x54, 0x54, 0x3C, // g
0x7F, 0x08, 0x04, 0x04, 0x78, // h
0x00, 0x44, 0x7D, 0x40, 0x00, // i
0x20, 0x40, 0x44, 0x3D, 0x00, // j
0x7F, 0x10, 0x28, 0x44, 0x00, // k
0x00, 0x41, 0x7F, 0x40, 0x00, // l
0x7C, 0x04, 0x78, 0x04, 0x78, // m
0x7C, 0x08, 0x04, 0x04, 0x78, // n
0x38, 0x44, 0x44, 0x44, 0x38, // o
0x7C, 0x14, 0x14, 0x14, 0x08, // p
0x08, 0x14, 0x14, 0x14, 0x7C, // q
0x00, 0x7C, 0x08, 0x04, 0x04, // r
0x48, 0x54, 0x54, 0x54, 0x20, // s
0x04, 0x04, 0x3F, 0x44, 0x44, // t
0x3C, 0x40, 0x40, 0x20, 0x7C, // u
0x1C, 0x20, 0x40, 0x20, 0x1C, // v
0x3C, 0x40, 0x30, 0x40, 0x3C, // w
0x44, 0x28, 0x10, 0x28, 0x44, // x
0x0C, 0x50, 0x50, 0x50, 0x3C, // y
0x44, 0x64, 0x54, 0x4C, 0x44, // z
0x00, 0x08, 0x36, 0x41, 0x41, // {
0x00, 0x00, 0x7F, 0x00, 0x00, // |
0x41, 0x41, 0x36, 0x08, 0x00, // }
0x02, 0x01, 0x02, 0x04, 0x02  // ~
};
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> Code Library All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group