CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com

Pickit3 with CCSLoader or any CCS programmer???

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
canavaroski90



Joined: 09 May 2011
Posts: 9

View user's profile Send private message

Pickit3 with CCSLoader or any CCS programmer???
PostPosted: Mon May 09, 2011 3:34 pm     Reply with quote

Hello CCS forums.

I'm a Pickit3 user and I want to program 16F or 18F PIC chips in CCS IDE (without using MPLAB or Pickit3 Standalone programmer). I've download CCS USB drivers and CCSLoad from official website (the newest ones). But I couldn't connect Pickit3 with CCSLoad. Always same error on CCSLoad, "No new device was found". Is there anything that I'm doing false?

I'm following instructions when I open the CCSLoad but nothing. Does CCSLoad support Pickit3? İf it does, how can I connect them?

And one more question, is there any programming interface supporting pickit3 in CCS C IDE?

I'm using windows 7 64Bit and CCS Compiler 4.093 versions.

Thanks, regards.
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Mon May 09, 2011 6:28 pm     Reply with quote

Go to the CCSLoad page. It doesn't say it supports Pickit 3. It only
supports CCS programmers and debuggers:
http://www.ccsinfo.com/content.php?page=ccsloadsw

It's easy to search the CCS website using Google. First, exclude the
forum. Then you get only the website. These search strings show that
CCS doesn't mention the Pickit 2 or 3 for use with CCSLoad:
Quote:

site:ccsinfo.com -forum Pickit
site:ccsinfo.com -forum Pickit2
site:ccsinfo.com -forum Pickit3

Or use this search string with Google to find anything they say about CCSLoad:
Quote:
site:ccsinfo.com -forum CCSload
canavaroski90



Joined: 09 May 2011
Posts: 9

View user's profile Send private message

PostPosted: Mon May 09, 2011 9:01 pm     Reply with quote

Thanks for quick reply PCM Programmer. After about 2 hour from when I've posted my query, I found my answer in the Help of CCSLoad. =)

And one more question again =) is there anyway to program my pic with pickit3 and CCS IDE? (again without MPLAB and Pickit3 standalone programmer)

Thanks, regards.
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Tue May 10, 2011 5:33 pm     Reply with quote

In this FAQ answer, CCS lists all the Microchip programmers that they
support, and I don't see your programmer listed:
http://www.ccsinfo.com/faq.php?page=icd2_real_ice
Also, I think they only support these as debuggers, not as programmers.
canavaroski90



Joined: 09 May 2011
Posts: 9

View user's profile Send private message

PostPosted: Wed May 11, 2011 2:50 pm     Reply with quote

Thanks for your references PCM Programmer.
Regards. Smile
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group