CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug Reports on this forum. Send them to support@ccsinfo.com

new IDC-U64 not working

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
sinbadcat1



Joined: 25 Aug 2010
Posts: 1

View user's profile Send private message

new IDC-U64 not working
PostPosted: Wed Aug 25, 2010 2:13 am     Reply with quote

About 6 months ago I ordered an ICD-U64 through Digikey. I didn't use it straight away but when I did it sought of worked but threw up a number of strange errors. So instead of tackling it immediately I put it away and eventually got in touch with CCS and was amazed to find out that after only 3 months the guarantee was out of date. Here in the UK we have a Government minimum period of 12 months overiding the manufacturer period. The device could be returned and fixed for around £45.00 as I remember so I decided with the postage this was too much and declined the offer. A few days later I oppened it up and found that the SMount PIC processor had a few legs slightly bent above the solder pads which had missed the flow solder process also another device had a middle pin of three not soldered properly. Re-flowing the joints produced a perfect working unit. I am an experienced Electronics engineer and used to this process if you are not send it back and bite the bullet but it's worth a look for those with the skill and the same problem. I informed CCS but received no reply. Rolling Eyes
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group