CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
ICD-U64 Issues

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
redant1



Joined: 12 May 2009
Posts: 2
Location: Houston, TX

View user's profile Send private message

ICD-U64 Issues
PostPosted: Tue May 12, 2009 1:52 pm     Reply with quote
First I have code compiled with Microchips compiler for both a dsPic and Pic24 processors. When this code is pointed to in ccsload I get a file status of "Corrupt". Does ccsload only work with code compiled with CCS compilers?

Second when I attempt to connect to the dsPic processor via the "Device" tab in ccsload by pressing the "Test" button I get a "Target Failed" message. More specifically I get a message stating "Chip not detected, ID=0181" what does this mean? I am trying to power the board with the ICD and have put the appropriate jumper in the ICD box.

Also, I know the board is good as I've successfully programmed and tested the board via a Microchip ICD2 device. What I am trying to accomplish is to have a cheaper solution for production to program these boards. Thanks in advance.
_________________
redant1
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group