CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
ICDU40 Debugging issues with PIC24H

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
Vamsi
Guest
ICDU40 Debugging issues with PIC24H
PostPosted: Mon Mar 30, 2009 4:02 pm     Reply with quote
Hi,

I have a ICDU40 with latest firmware 2.53 to support PIC24H MCU's.
I am able to download software to my target board with PIC24HJ128GP506 using the ICDU40. But when i try to enter the debugging mode, all the code is loaded by the complier and finally the compiler asks me to check the fuse and conections for VDD,MCLR, ICSP pins. I checked them and all are fine. What can i do in this situation?

I am using PGD3 and PGC3 and my target board has 3.3V.

Vamsi
Vamsi
Guest
PostPosted: Thu Apr 02, 2009 8:40 am     Reply with quote
Turns out that it is a compiler issue.

I updated the CCS compiler to version 4.090 and everything is working now.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group