CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug Reports on this forum. Send them to support@ccsinfo.com

Programming dsPIC33CK32MC102 with ICD-U80

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
jgschmidt



Joined: 03 Dec 2008
Posts: 184
Location: Gresham, OR USA

View user's profile Send private message Send e-mail Visit poster's website

Programming dsPIC33CK32MC102 with ICD-U80
PostPosted: Wed Mar 24, 2021 3:51 pm     Reply with quote

This is my first foray into dsPIC33 devices. I'm trying to program a dsPIC33CK32MC102 with ICD-U80 and the programmer doesn't seem to recognize the device.

Since the device only comes in SMT format, it's on a SMT to DIP carrier.
I've connected the 3 pairs of power connections with 0.1uF bypass caps, and a 10K from ~MCLR to +, all per the data sheet.

The ICD-80 is connected to MCLR, Pin 17 for PGD1 and Pin 18 for PGC1.

I'm using CCSLOAD and try to do a Read Device ID and get an error.

I've tried powering externally and via the ICD.

The ICD works fine when I go back to testing with my trusty 26K22.

What am I missing? (This device does not have a Vcap connection, so I presume that's not the problem.)

Thanks for any help,
- Jurgen
_________________
Jürgen
www.jgscraft.com
jgschmidt



Joined: 03 Dec 2008
Posts: 184
Location: Gresham, OR USA

View user's profile Send private message Send e-mail Visit poster's website

Programming ds33CK32MC102 with ICD-U80 (solved)
PostPosted: Wed Mar 24, 2021 3:56 pm     Reply with quote

Oops, figured it out. Just needed to update the firmware on the ICD
_________________
Jürgen
www.jgscraft.com
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group