CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com

sbus2 to ccs

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
yossihagag1978



Joined: 04 Apr 2013
Posts: 19

View user's profile Send private message

sbus2 to ccs
PostPosted: Sun Feb 13, 2022 8:55 am     Reply with quote

Hi
has anyone wrote a code in ccs that communicates with futaba servo in s.bus ?

https://en.wikipedia.org/wiki/Serial_Bus_Protocol_2
Ttelmah



Joined: 11 Mar 2010
Posts: 19195

View user's profile Send private message

PostPosted: Mon Feb 14, 2022 11:05 pm     Reply with quote

Have a look at this thread:
[url]
http://www.ccsinfo.com/forum/viewtopic.php?t=57485&highlight=sbus
[/url]
The poster I pointed to, was working on reading sensors primarily, but
there is the data there to handle writing as well, and the code he was
writing was using CCS.
temtronic



Joined: 01 Jul 2010
Posts: 9081
Location: Greensville,Ontario

View user's profile Send private message

PostPosted: Tue Feb 15, 2022 7:20 am     Reply with quote

you could take the code from the 'other micro' and convert into CCS C.....
yossihagag1978



Joined: 04 Apr 2013
Posts: 19

View user's profile Send private message

PostPosted: Tue Feb 15, 2022 7:23 am     Reply with quote

I know .
Just wondering if someone else already did it
temtronic



Joined: 01 Jul 2010
Posts: 9081
Location: Greensville,Ontario

View user's profile Send private message

PostPosted: Tue Feb 15, 2022 9:18 am     Reply with quote

Well it's not 'rocket science', they've already done the hard work, conversion is easy.
I'm curious about the SBUS2 being an interface to SCSI. Be kinda nice to have a 50 cent PIC use my $1000 SCSI drive !!!
Ttelmah



Joined: 11 Mar 2010
Posts: 19195

View user's profile Send private message

PostPosted: Tue Feb 15, 2022 11:11 am     Reply with quote

No Jay.
There seems to be some major confusion here. The link given to Wikipedia, is for SBP-2, which is not SBUS.
SBUS, is a proprietary Futaba serial standard, not SBP-2.....
temtronic



Joined: 01 Jul 2010
Posts: 9081
Location: Greensville,Ontario

View user's profile Send private message

PostPosted: Tue Feb 15, 2022 11:50 am     Reply with quote

sigh, getting old ain't fun...
I read this from the liink..
Original work on Serial Bus Protocol started as an attempt to adapt SCSI to IEEE Std 1394-1995 serial interface.

Some dayze I think there's too many 3 letter words to figure what they mean....
too bad FUTABA didn't name THEIR bus.. FSB, sigh....
oops, that means Front Side Bus ? double sigh....
Maybe FSS, Futaba Serial Standard ?? Now some will say FSS means something else...

can we go back to 20ma TTY loops please !
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group