CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com

Trial Version of PCD: what modules are supported

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
jehcc



Joined: 10 Jan 2019
Posts: 3
Location: Washington State

View user's profile Send private message

Trial Version of PCD: what modules are supported
PostPosted: Sat Jan 12, 2019 7:26 pm     Reply with quote

In test driving the PCD compiler from MPLAB X v5.10 I am getting a lot of compile failures without any helpful error messages.

I am wondering if that is due to the limitations of the trial version, the description states that "Only 15% of the example programs and drivers are provided".

Is there any way to tell if my test project falls into this category?

Thanks
dluu13



Joined: 28 Sep 2018
Posts: 395
Location: Toronto, ON

View user's profile Send private message Visit poster's website

PostPosted: Sat Jan 12, 2019 8:09 pm     Reply with quote

It would be helpful if you posted some code and the compiler output anyway.

This page shows all the drivers and example code that are included with the full version:
http://www.ccsinfo.com/devices.php?page=exlist

You can compare that list with the Program Files\PICC\Drivers and examples folder to see what you are missing.

As far as I am aware, everything of the core compiler is included and only those drivers and examples will be missing a majority. In other words, I think that if a function is in the manual then it should be supported.
dluu13



Joined: 28 Sep 2018
Posts: 395
Location: Toronto, ON

View user's profile Send private message Visit poster's website

PostPosted: Sun Jan 13, 2019 12:39 pm     Reply with quote

I think this is actually relevant info since you are using MPLAB X.

I recently purchased the PCD command line compiler (v 5.082) and the first time I tried to compile with MPLAB X, the compiler would get stuck. The CCS compiler window would hang, saying "Not Found". However, compiling from the command line would work. I contacted CCS support and they provided me with a new ccsc.exe.

You should also contact the email address at the top right of the forum board for technical support if that's what you are experiencing.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group