CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug Reports on this forum. Send them to support@ccsinfo.com

CCSLOAD Won't load .hex file with #import included

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
mobrien99



Joined: 15 Apr 2013
Posts: 3
Location: Penn Yan, NY

View user's profile Send private message

CCSLOAD Won't load .hex file with #import included
PostPosted: Mon Apr 15, 2013 9:47 am     Reply with quote

I have a combined .hex file with an #import of my bootloader.
All works well when I load it with ICD Debug loader. Bootloader comes up, sees the application is there and transfers control to it.
When I load it with CCSLOAD, it doesn't work because it appears that the application code gets loaded but the bootloader (#imported code) including the revectored interrupt locations doesn't. Any ideas?
The #import line:
#import(FILE=bootloader.hex,HEX,RANGE=0:0x1BFF)

CCSLOAD version: 4.039
Compiler: 4.138
Target: 18F67J11
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group