i know this is not CCS related, however I wondered if anyone had any experience in this. I need to program a board using ICSP, the board is located in a place that I can not easily get a laptop and my ICD2 close enough to comfortably program it. I was thinking of setting my laptop and ICD2 about 20 feet away and use a long (20ft) cable to connect the ICD2 to my board. is this distance going to be ok? obviously I will test before the real thing.
Joined: 06 Sep 2003 Posts: 20337
Posted: Mon Aug 03, 2015 3:50 pm
Just Google it:
icd2 maximum cable length
20 ft. is too long. The document titled "Troubleshooting MPLAB ICD 2" says:
Keep the total length of the MPLAB ICD 2 cable and your board under 18 inches.
In some cases that is too long.
Joined: 24 Jun 2004 Posts: 1497 Location: Edmonton, Alberta
Posted: Mon Aug 03, 2015 7:32 pm
Can you string out USB cables and a USB hub (or hubs) for most of the 20' and have your ICD2 right next to your target?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum