CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com

ICD_U64 Problems

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
xiantg



Joined: 21 Jan 2011
Posts: 9

View user's profile Send private message

ICD_U64 Problems
PostPosted: Fri Mar 30, 2012 4:01 am     Reply with quote

I have bought new ICD-U64, but it is not working. It gives messages such that ‘Download failed’,’ Chip not detected’, ‘verification error’ etc.
Note: ICD-U64 is taking power from target board.
Following are readings of diagnostics window for PIC16F877A and file used is an example from CCS compiler (ex_bootload.c). I have used different blank microcontroller e.g. PIC18F4680, PIC18F452 and PIC16F877A but problem is that I am not able to download code to any of microcontroller.

Software : 4.032
Firmware :2.89
Hardware :Rev2
Target Vdd : 3.5V
Target Device ID:
Read : xx000000000xxxxx
Expect: xx001110001xxxxx
----------- Vss------- Vdd-----Vpp
MCLR---- 4.6V------- 4.6V----4.6V
---------- Vss---------Vdd
PGD------0.73V-------0.76V
----------- Vss---------Vdd
PGC-------4.2V--------4.7V
If ICD-U64 is damaged the How I can repair it, which IC will have to be replaced?
SuperDave



Joined: 22 May 2008
Posts: 63
Location: Madison, TN

View user's profile Send private message Visit poster's website

PostPosted: Fri Sep 14, 2012 1:00 pm     Reply with quote

I know this is an old question but just in case someone else finds it, the ICD-U64 takes power from USB, NOT from your board. You have apparently connected two power supplies together which is a no-no.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group