CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Using a RealTek Ethernet Switch (RTL8305SC) with a PIC

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
seidleroni



Joined: 08 Sep 2008
Posts: 21

View user's profile Send private message

Using a RealTek Ethernet Switch (RTL8305SC) with a PIC
PostPosted: Fri Nov 06, 2009 8:15 pm     Reply with quote
I'm starting a project using the Realtek RTL8305SC ethernet switch. Does anybody have a good idea of how to use it, some code for it, or even a flow diagram of how it should be used in conjunction with an Ethernet enabled PIC?

Any help would be appreciated! I'm currently wondering what I need to do to get it working with the PIC, specifically the order of events. Do I need to reset the switch before enabling the ethernet in the PIC, or do I enable the ethernet on the PIC while the switch is in reset mode?

Thanks!
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group