CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Problem with External eeprom...
Goto page Previous  1, 2
 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Sun Jun 28, 2009 1:17 pm     Reply with quote
I tested your program in hardware, and it worked OK. I think you may
have a problem with Hyperterminal. It may be that you don't understand
the "backscroll" feature of Hyperterminal. It's confusing.


I suggest that you try a different terminal program: TeraTerm
Click on this link and wait 5 seconds. It should display a download
window:
http://sourceforge.jp/projects/ttssh2/downloads/55061/teraterm-4.73.exe/

Install it. Accept all the default options. After it has been installed,
start it and configure it. Here is how to configure it:

1. When TeraTerm starts, it will display a window for "New Connection".
2. Select the tickbox for "Serial". Then select your COM port.
For most people, the default setting of "Com1" is correct.
3. Go to the Setup menu, and select "Save Setup". The "Save Setup"
menu is near the end of the list.

TeraTerm is already setup for 9600N81. It's ready to go.

Here's the output that I get in TeraTerm. It's correct.
Quote:

Start...Erode
Savitha
PS Park
GH
Sathiyam Hos
Collector of
Kumalan kutt
palayapalaya
Veer Palayam
Sengotampala
Thindal
Thindal medu
Pavalathan p
Veppanpalaya
Mettukadai
Vannankattu
Moolakkarai
Sathiramput
Koorapalayam
Vaaikkalmedu
Maharaja col
Kanthampalay
Police stati
Perundurai

This was tested with vs. 4.057, with an 18F452, and Ramtron FM24C64,
on a PicDem2-Plus board. Everything is running at +5 volts.
-------
Edit: Updated links to TeraTerm for latest version.
Edit: Again updated link to latest version of TeraTerm.

Last edited by PCM programmer on Fri Mar 23, 2012 1:51 pm; edited 1 time in total
gpsmikey



Joined: 16 Nov 2010
Posts: 588
Location: Kirkland, WA

View user's profile Send private message

PostPosted: Sun Nov 28, 2010 1:42 pm     Reply with quote
Note that as of Aug 30, 2010, the current version of TeraTerm is 4.67 ...
http://logmett.com/index.php?/download/tera-term-467.html

mikey
_________________
mikey
-- you can't have too many gadgets or too much disk space !
old engineering saying: 1+1 = 3 for sufficiently large values of 1 or small values of 3
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group