CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
PICkit 2 Programmer and PCM Compiler problem

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
uni_student



Joined: 01 Aug 2007
Posts: 38
Location: AUckland, NEW ZEALAND

View user's profile Send private message Send e-mail MSN Messenger

PICkit 2 Programmer and PCM Compiler problem
PostPosted: Thu Feb 12, 2009 3:41 am     Reply with quote
First time using the PCM compiler to program PIC16F716. PICkit 2 programs the chip fine but verifying the program comes up with the following message:
Quote:
Verification of Program Memory failed at address 0x000000


What could i possibly be doing wrong? Any fuses in the code i need? Any help appreciated.
jgschmidt



Joined: 03 Dec 2008
Posts: 184
Location: Gresham, OR USA

View user's profile Send private message Send e-mail Visit poster's website

PostPosted: Fri Feb 20, 2009 10:38 am     Reply with quote
How are you connecting the PicKit programmer to the 16F716 chip? If you are using the Low Pin Count Demo board, then this is the wrong chip for that board.

I also use the PicKit2 for most of my work but I am using mostly 8/14/20-pin parts. 18-pin parts need to be connected via ICSP.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group