CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
What different between pins of PORTB in sleep mode ?

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
nmhai
Guest
What different between pins of PORTB in sleep mode ?
PostPosted: Tue Sep 16, 2008 11:02 pm     Reply with quote
Hi!
I'm working on PIC16F886 into sleep mode. Set all pins as outputs and set them low then standby current <100nA@3V. when set pin_b1 or pin_b2 is input then standby current <100nA. But when I set pin_b0 or pin_b3 or pin_b4 or pin_b6 is input then standby current ~= 10uA. what different betwen pin of PORTB? Can help me? Thanks.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group