CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
please help with Pickit2 and 16F690

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Wed May 14, 2008 1:30 am     Reply with quote
The following program should blink the LED labeled "DS1" on the board.
This is the board that Microchip calls the "Low Pin Count Demo Board".
Make sure that you install jumpers JP1 and JP5. These jumpers enable
the "DS1" LED and the MCLR pull-up resistor.
Code:
#include <16F690.H>
#fuses INTRC_IO, NOWDT, NOPROTECT, BROWNOUT, PUT
#use delay(clock=4000000)
   
//====================================
void main()
{

while(1)
  {
   output_high(PIN_C0);
   delay_ms(500);
   output_low(PIN_C0);
   delay_ms(500);
  }

}     
IceMetal
Guest
PostPosted: Wed Nov 19, 2008 2:44 am     Reply with quote
PCM programmer wrote:
The following program should blink the LED labeled "DS1" on the board.
This is the board that Microchip calls the "Low Pin Count Demo Board".
Make sure that you install jumpers JP1 and JP5. These jumpers enable
the "DS1" LED and the MCLR pull-up resistor.
Code:
#include <16F690.H>
#fuses INTRC_IO, NOWDT, NOPROTECT, BROWNOUT, PUT
#use delay(clock=4000000)
   
//====================================
void main()
{

while(1)
  {
   output_high(PIN_C0);
   delay_ms(500);
   output_low(PIN_C0);
   delay_ms(500);
  }

}     




you might want to change the BROWNOUT, to NOBROWNOUT so it can work under 4.0V
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group