CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Not Enought Ram or Invalid ORG range when I added a function

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Nick
Guest
Not Enought Ram or Invalid ORG range when I added a function
PostPosted: Tue Jul 12, 2005 11:54 am     Reply with quote
Not Enought Ram or Invalid ORG range when I added a function to loader.c

Does anyone know what I am doing wrong? I increased
#define LOADER_SIZE 0x800 but still get one of those two error message depending on the size.

Thanks,

Nick
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Tue Jul 12, 2005 1:14 pm     Reply with quote
Quote:
Not Enough Ram or Invalid ORG range when I added a function to loader.c

You didn't state your PIC, so I'll assume it's a 16F series.
What happens if you enable full use of ram, as shown in bold below ?

#include <16F877.H>
#device *=16

If that doesn't help, then post the first line of your function,
and post the #org statement that you put in front of your
function to declare its ROM usage.
Also state where in the loader.c file you placed your function.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group