CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug Reports on this forum. Send them to support@ccsinfo.com

Latest ICD software.

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
Neutone



Joined: 08 Sep 2003
Posts: 839
Location: Houston

View user's profile Send private message

Latest ICD software.
PostPosted: Thu Sep 30, 2004 7:42 am     Reply with quote

The new ICD software pops up a warning every time I program a device reminding me that bulk erase and fuse erasing does not work at low voltage. Is there some way to get this idoits message not to pop up every time. I find myself hitting the button to flash the chip only to return later and find it has been waiting for me to admit that I have read the data sheet and know how the chip works. I just don't know what to do.
PCM programmer



Joined: 06 Sep 2003
Posts: 20399

View user's profile Send private message

PostPosted: Thu Sep 30, 2004 11:03 am     Reply with quote

Send an email to Hans.
Tom-H-PIC



Joined: 08 Sep 2003
Posts: 98
Location: New Castle, DE

View user's profile Send private message

PostPosted: Thu Sep 30, 2004 11:47 am     Reply with quote

Yes this is a pain in the neck!
Pilot



Joined: 06 Jul 2004
Posts: 9

View user's profile Send private message ICQ Number

PostPosted: Thu Sep 30, 2004 1:21 pm     Reply with quote

see settings on the upper left corner of the advanced page
Tom-H-PIC



Joined: 08 Sep 2003
Posts: 98
Location: New Castle, DE

View user's profile Send private message

PostPosted: Thu Sep 30, 2004 1:29 pm     Reply with quote

Oh that is embarrassing. Embarassed Thank You
Darren Rook



Joined: 06 Sep 2003
Posts: 286
Location: Milwaukee, WI

View user's profile Send private message Send e-mail

PostPosted: Thu Sep 30, 2004 1:34 pm     Reply with quote

PCM programmer wrote:
Send an email to Hans.


Laughing Laughing Laughing
Neutone



Joined: 08 Sep 2003
Posts: 839
Location: Houston

View user's profile Send private message

PostPosted: Thu Sep 30, 2004 3:49 pm     Reply with quote

Pilot wrote:
see settings on the upper left corner of the advanced page


Thanks. I had not noticed that.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group