temtronic
Joined: 01 Jul 2010 Posts: 9205 Location: Greensville,Ontario
|
|
Posted: Wed Jul 20, 2011 1:34 pm |
|
|
Gee I found lots of info, even National's website has info. The datasheet is quite good at explaining the SPI commands/interface stuff. Depending on how simple or complex you want it to be the driver should only take 2 or 3 days tops.
If you have the demo board, their s/w is free to download and test, if just the chip well, then you're in for some fun designing a proper pcb. |
|