CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Serial communication on RX and regular output on TX

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Skirmitt



Joined: 19 May 2009
Posts: 60

View user's profile Send private message

Serial communication on RX and regular output on TX
PostPosted: Thu Oct 16, 2014 8:41 am     Reply with quote
Is it possible to use the serial port to receive data and the TX line as output ?

so this declaration:
Code:
#use rs232 (baud=9600, rcv=PIN_C7)

I need C6 to be used as regular output.
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Thu Oct 16, 2014 12:18 pm     Reply with quote
See this post by Ttelmah. It explains how to do it:
http://www.ccsinfo.com/forum/viewtopic.php?t=49307
Skirmitt



Joined: 19 May 2009
Posts: 60

View user's profile Send private message

PostPosted: Fri Oct 17, 2014 3:24 am     Reply with quote
Great thanks !
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group