CCS :: View topic - EEPROM difficulties -18F452 CCS ICD & 3.177

FAQ

Forum Help

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com

EEPROM difficulties -18F452 CCS ICD & 3.177

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

Mark

Joined: 07 Sep 2003
Posts: 2838
Location: Atlanta, GA

Posted: Sat Sep 20, 2003 5:34 pm

See below:

Code:

int address;
long number, finally;
byte topbyte, botbyte, topback, botback;
number = 2280;
// No need and with 0xFF since botbyte ins 8 bits
//botbyte = number & 0xFF;
botbyte = number;
topbyte = number >> 8;
address = 0;
write_eeprom(1l, topbyte);
write_eeprom(2l, botbyte);
address = 1;
topback = read_eeprom(1); // or 0
botback = read_eeprom(2); // or 1

// This is incorrect since topbyte is 8 bits multiplying by 256 will result in 0
//finally = (topback * 256) + botback;
finally = make16(topback, botback);

Here's how I would do it:

Code:

long address;
long number;
union
{
struct
{
UINT8 lowbyte;
UINT8 highbyte;
};
UINT16 word;
}data;

number = 2280;
address = 0;
write_eeprom(address, number>>8);
write_eeprom(address+1, number);

// now to test
data.lowbyte = read_eeprom(address);
data.highbyte = read_eeprom(address+1);
// data.word contain the 16 bit number

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum