CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com

CCSLOAD problem

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
jameszum



Joined: 31 Jan 2012
Posts: 14

View user's profile Send private message

CCSLOAD problem
PostPosted: Tue Feb 26, 2013 2:30 pm     Reply with quote

I am trying to program a PIC24F32KA301 CPU and I get the following error from the CCSLOAD routine:

12:26:00 Attempting to connect
12:26:01 Scanning file: c:\vibration\vl-ver6_with_usb-rev0\vl_rev_6.hex
12:26:01 Assigning chip: PIC24F32KA301
12:26:01 Loaded: PIC24F32KA301
12:26:02 Scanning file: c:\vibration\vl-ver6_with_usb-rev0\vl_rev_6.hex
12:26:02 Assigning chip: PIC24F32KA301
12:26:02 Loaded: PIC24F32KA301
12:26:02 Assigning chip: PIC24F32KA301
12:26:02 Loaded: PIC24F32KA301
12:26:02 Write FILE -> CHIP
12:26:03 Download failed - Chip Detect.
12:26:03 Setting Vpp=0"

If I close the PCW HD 4.14 compiler, disconnect the ICD-U64 programmer, then restart the program and reconnect the ICD-U64 programmer, I can program the unit 2 - 3 times before the same problem begins again. Any thoughts?
jeremiah



Joined: 20 Jul 2010
Posts: 1314

View user's profile Send private message

PostPosted: Tue Feb 26, 2013 6:54 pm     Reply with quote

I'm not sure how closely related they are, but I am using a PIC24F32KA304 (and 302). I've found the most recent ICD-U64 firmware doesn't work well with those chips, so I found an older revision (I want to say rev 2.87) and haven't found any issues.

I would suggest contacting CCS support and letting them know. They are generally very helpful with things like this.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group