CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug Reports on this forum. Send them to support@ccsinfo.com

ICD-S problems

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
Kalle
Guest







ICD-S problems
PostPosted: Thu Nov 13, 2003 7:07 am     Reply with quote

Hi

I have a problem with my ICD-S.
It started when I was about to test some code in debug. The IDE told me that the ICD doesn't support that kind of operation (a reset) and then started to complain about the firmware.
I restarted the PCW and when I try to connect to the ICD a message box appears that has the following: Could not connect: No response from icd, The firmware loaded is wrong.

PCW is 3.180 and ICD-S firmware is (was?) 1.15.
drolleman
Guest







PostPosted: Thu Nov 20, 2003 3:29 pm     Reply with quote

I have ran into the same problem. when the icd-s is downloading a new os to the icd-s the power supply on the target board was not enough to properl power the icd-s. as a result the icd-s needed to be reloaed manually. there is a five pin connector inside the icd-s to do this.
Patrick Frank
Guest







PostPosted: Wed Jul 07, 2004 2:43 am     Reply with quote

Hi,
i have the same problem with my ICD-S 20.
What must i program in the ICD-S, the bootloader or the firmware.
Where i get the bootloader?

Best Regards
Patrick Frank
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group