CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug Reports on this forum. Send them to support@ccsinfo.com

Load-n-Go queries

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
TL



Joined: 15 Sep 2003
Posts: 75

View user's profile Send private message

Load-n-Go queries
PostPosted: Wed Feb 17, 2010 10:18 am     Reply with quote

Hi, I would like to buy one. Can someone give me some answers.

1. Can the Load-n-Go be able to program the flash, EEPROM and configuration fuses independently?

eg1. Program just flash and configuration fuses only?

eg2. Program just flash only?

eg3. Program just configuration fuses only?

eg4. Program just EEPROM only?

eg5. Program flash, configuration fuses and EEPROM?

2. Is there a verify function?

3. How long does it take to program a hex file? eg. 64KB

4. Is it reliable?

Thank you.
Franck26



Joined: 29 Dec 2007
Posts: 122
Location: Ireland

View user's profile Send private message

PostPosted: Mon Apr 05, 2010 4:56 am     Reply with quote

Hi,
The Load-n-Go does all what you need, the only problem is that it doesn't do it when you want it!!!

I never had so many problems than with this device.

Example, today I changed the setting to program the EEPROM (I was not programming it before). result: it programs, no error, excepted that the micro does not start after programming!!!

And it is not a problem of EEPROM programming: the micro used doesn't have an EEPROM...

Anyway, I think I'll give up with this tool, I have been trying to use it for 1 year, and there is a new bug for each software upgrade...

Good luck,
Franck.
TL



Joined: 15 Sep 2003
Posts: 75

View user's profile Send private message

PostPosted: Tue Apr 13, 2010 8:45 am     Reply with quote

Hi,

Thanks for replying. I bought one about a month ago and using V4.023 CCSLOAD, I had no problems programming the flash memory and EEPROM of 18F6720 and 18F2620 using battery and dc supply in turn.

I haven't tried programming just the flash only, so, I'm not sure whether it will work.

For people who haven't used it before, the unit needs power (from battery or dc supply) and the target chip also needs a separate power supply.

For me, so far so good.
TheMattster



Joined: 11 Jun 2010
Posts: 5
Location: Chicago area

View user's profile Send private message Visit poster's website

Load-n-Go Screen
PostPosted: Fri Jun 11, 2010 7:37 am     Reply with quote

https://dl-web.dropbox.com/get/SharePhotos/CSS%20Prog2.JPG?w=44231cb6

A picture of the screen where you enable and disable the programming options.

-Matt
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group